Lock Punch for Door Frame

Lock Punch for Door Frame is used for punching the install holes, screw holes lock holes for door profiles, and the punch speed is much faster than milling machine. Meanwhile our machine is low cost for training and maintain, and it assistants with dies for working. the operation is very smooth...

Description


Lock Punch for Door Frame is used for punching the install holes, screw holes lock holes for door profiles, and the punch speed is much faster than milling machine.  Meanwhile our machine is low cost for training and maintain, and it assistants with dies for working. the operation is very smooth and no deform and furs. We used 3D design for machine and dies, so that our machine and dies in high precision and good quality, can be good for service for you. More and more people would like to use such punch machine for window and door.


Specification about Lock Punch for Door Frame:

condition

new

Material process

PVC profiles and Aluminium

Power source

Hydraulic cylinder

Place origin

Shenzhen, China

voltage

/

Dimension (LxWxH)

1650x550x1700mm

weight

650kg

Warranty

12months

After-sales service

Engineer can be available on line in all day

Packing

Plywood case

Air pressure

0.5-0.8Mpa

Punching travel

50-100mm(optional)

Power

110v/240v/380v 3phases

Shipping

ship


Features and superiority:

1)our machine can bear much pressure because we make stronger worktable . the worktable adopts thicker square pipes and we add solid steel into the pipes, to enhance the worktable. Such way to make sure the worktable is table during work.

frame.jpg

 

2)the punch machine has fast punching speed, one operation just takes you 2seconds, and can make sure it is smooth and no deform. We can set four sets of dies onto the wortable, and they can work seperately, also can be simultaniously.


split dies.jpg


3) there are four sets of foot pedals for the machine, one pedal controls one set of die, and our foot pedals is 24V, safe for workers’ operation, not like other suppliers to use 380V voltage, then you have to contact it to ground, make you much trouble.


wortable.jpg


4)we design and adopt point-control style for the punch machine, to help you protect the tooling during machine punching down. Meanwhile , this design is very useful for testing the moulds during you install new moulds onto the machine. The point control system make sure the punching will not come down too deep to damage the knives and dies.


point.jpg


5 )we use stronger plywood case to make our packing is enough strong for machine, meanwhile, we will add steel square pipes to the bottom of the case, fix the machine onto the bottom with the pipes, so that the machine is safe during shipping


packing.jpg


6) Now our customers are distributed in USA, Poland, Ukriane, Australia, Taiwan, Thailand,ect,all of them give us high pride of our quality and service. More and more customers know us and have cooeprated with us, they are satisfied with our quality, design and service.

分布图.jpg


Factory introduction:

Shenzhen P-luck machinery technology co,. ltd has more than 8 years history for window and door machinery, specially for punching tooling and punching machine. We win lots of customers with high quality and good precision. P-luck Machine is a high-tech enterprise specializing in the production, research and development and sales of plastic steel door and window processing equipment ,top grade aluminum alloy door and window equipment .The working staff in the corporation is of high level intelligence and high technique. For punching mold, we adopt 3D design to make sure our products in high precision, so that our customers can produce high quality and precise window and door


If you are interested in our machine and moulds, please contact with us as following in details:

image011.jpg


 

Hot Tags: lock punch for door frame, China, factory, manufacturers, suppliers, wholesale, customized, buy

Related Products

Feedback

Products List