Home > News > Content
Window Machinery Factory Tell How To Maintain The Window And Doors?
May 03, 2018

If you want long-term use of windows and doors in addition to the use of good materials in the day-to-day maintenance is also very important, but it is also very easy to be ignored, and maintenance in place not only use a long time there is a good decorative effect. Broken Bridge Aluminium Equipment www.jnctjq.com Steel Doors: When dealing with stains on the surface of steel doors, wipe them with a soft cotton cloth, because the hard cloth can easily scratch the surface of the door; special attention should be paid to the impregnation of neutral reagents or water. The rag should not be placed on the surface of the steel door for a long time, otherwise it will damage the surface and discolor or peel the decorative material.

Solid wood door: When dealing with surface stains, the same need to use a soft cotton cloth to wipe, to avoid the hard cloth is easy to scratch the surface; stains too heavy, you can use neutral detergent, toothpaste or special cleaning agent for furniture, after the stain Then dry; pay attention to soaked in neutral reagents or moisture cloth do not place on the surface of the wooden door for a long time, otherwise it will immerse the surface, so that the surface material discoloration or peeling; pay attention to the corners of the door do not rub too much, otherwise Will cause peeling edge paint.

The cling film helps the window to oil

Door and window glass can be cleaned with a rag with vinegar. If the windows are stained with oil, spray the cleaner with a glass and then apply a plastic wrap to soften the solidified oil. After 10 minutes, remove the cling film and wipe it with a damp cloth.

When cleaning the screens, the window screens must be removed first. Put the removed screen in the bathtub or next to the bathtub. Rinse gently with a soft hose or shower to remove cobwebs, dust, and other contaminants from the top; then, pour some soapy water in a bucket, dip some soapy water with a short-haired brush, and then soften it on the screen. Circle scrubbing to ensure that the screens are covered with enough soap foam; finally, clean the soap with a soft hose or shower and wait until it is air-dried.

There are tips for buying parts

Door lock: Should buy the double-sided security lock, compare the weight of the lock with the hand, the heavier it shows the thicker and more worn material. On the contrary, the materials are thin and easily damaged. Second, look at the surface finish of the lock, whether it is delicate and smooth, without spots. Repeatedly open to see the sensitivity of the lock cylinder spring.

Cylinder: When the rotation is not flexible enough, a small amount of black powder can be scraped from the pencil lead and lightly blown into the lock hole. This is because the graphite component is a very good solid lubricant. Do not instill lubricating oil as this will make it easier to adhere to dust.

Floor Spring: The floor spring of the door should be stainless steel or copper. Before being put into use, it should be adjusted before and after the opening and closing speed to facilitate use. Hydraulic parts must not leak oil. Can also use the door.

Hinges, hanging wheels, casters: The moving parts may lose their performance due to the adhesion of dust during long-term exercise. One or two drops of oil can be kept smooth every half year or so.

Shenzhen P-luck Machinery Technology Co,.ltd

No10-1, tongfuyu yongshengtai industrial park, Longtian Village, Kengzi town, Pingshan District, Shenzhen city

post code: 518112

contact person: lily shen

Mobile:86-15112696960

email:machine@yixianggroup.com.cn

   yefeng022@126.com


wechat:86-15112696960

whatsapp"86-15112696960



Products List