Profile cutting machine: It adopts single-phase AC series excitation motor as its power. It drives the flat grinding wheel cutting metal tool through the transmission mechanism. It has the advantages of safety and reliability, low labor intensity, high production efficiency, smooth cut surface, etc., suitable for AC 50/ 60Hz, rated voltage 220V. Widely used in circular steel pipe, special-shaped steel pipe, cast iron pipe, round bar, channel steel, angle steel, flat steel and other profiles for cutting.
What are the structural features of the profile cutter?
The profile cutting machine is composed of a series motor, a transmission mechanism, a shield frame, a base, and a transferable clamp.
Single-phase AC motors are classified into single-insulated profile cutters and double-insulated cutters according to whether or not there is additional insulation between stator, rotor, and ground.
The angle between the clamp jaws and the grinding wheel axis of the clamping workpiece can be arbitrarily adjusted from left to right and from 0 to 45 degrees, and the right position of some products can be adjusted from 0 to 30 degrees.
The parallel grinding wheel used in the profile cutting machine is a fiber reinforced resin sheet grinding wheel with a diameter of not more than 406 mm and a rated line speed of not more than 80 m/s.