At present, broken aluminum doors and windows can not be like plastic steel windows - like seamless welding process assembly angle, and now mainly mechanical assembly, such as improper handling, the actual project will be prone to water seepage phenomenon. The main reason is that the design of the profile drainage system is not reasonable, and the installation and construction have not been done. It often occurs when rainwater seeps into the profile cavity through the gap between the sealant and the glass, and can not be discharged in time, resulting in water accumulation. Long, the rain will seep into the wall through the assembly gap of the profile, thus destroying the interior decoration effect. Therefore, when designing aluminum doors and windows with thermal breaks and bridges, it is necessary to design a drainage system to avoid water accumulation and possible water seepage.
The design principle of the waterproof system of the aluminum alloy doors and windows of the thermal insulation broken bridge is very simple, that is, the principle of pressure balance. As long as this thinking principle is used and a set of drainage channels is designed, it is entirely possible to structurally and technically solve the possibility of rain water accumulation, thereby avoiding the occurrence of rain leakage.
If you are interested in our products, please contact with us as following:
Shenzhen P-luck Machinery Technology Co,.ltd
No10-1, tongfuyu yongshengtai industrial park, Longtian Village, Kengzi town, Pingshan District, Shenzhen city
post code: 518112
contact person: lily shen