Home > Knowledge > Content
aluminium bracket cutting machine
Apr 12, 2018

1 Main uses and characteristics

1. 1 use

1.1.1 aluminum door and window corner cut saw is a special equipment used for corner cutting of aluminum doors and windows. The maneuverability has the characteristics of high strength, stable and reliable performance, high work accuracy, and easy operation.

1. 2 Features

1.2.1 This machine uses hard alloy inlay saw blade, high line speed, high processing accuracy.

1.2.2 The main motion pair of the machine adopts a damping cylinder, which has uniform motion and high precision.

1.2.3 The machine is equipped with feeding mechanism, stable work, high efficiency, and avoid waste of raw materials.

1.2.4 The machine has a counting function, which can increase work efficiency and avoid waste of raw materials.

1.2.5 The machine has a spray device, which can improve the processing accuracy and extend the service life of the saw blade.

2 Technical parameters

2.1 sawing length 5mm-500mm (select manual limit)

2.2 Motor Power 2.2KW

2.3 motor speed 2840r/min

2.4 working voltage 380V 50HZ

2.5 Blade size ¢500mm×¢30mm×4Z120

2.6 saw blade feed speed 0-3m/min

2.7 working pressure 0.5Mpa

2.8 Dimensions 2500mm×1600 mm×1400 mm

2.9 feeding length 0-500 mm

2.10 Net Weight 500kg

3 transmission system

3.1 The main drive of this machine is driven by a three-phase motor through a V-belt to rotate the spindle box. A saw blade is mounted on the main shaft.

3.2 Other movements are done pneumatically.

4 main structure and performance

4.1 bed

4.1.1 The bed is welded by rectangular pipe and flat steel.

4.1.2 The main body of the bed is equipped with a main drive system; a protective plate is installed around the bed; a work clamping mechanism and a protective cover are installed on the work surface of the bed; observation windows are provided in front of the protective cover.

4.2 Feeding device

4.2.1 The feed back device is installed on the right side of the bed, and it can count the number to complete the specified number of feeding actions.

4.3 profile drag rack

4.3.1 Profiles The tow frame can be used for longer profiles to ensure reliable operation of the feeding device and prevent deformation of the profile.

4.4 Pneumatic section

4.4.1 The pneumatic part is mainly composed of air source processor, gas circuit, one-way speed control valve, solenoid valve, and cylinder.

5 The electrical system consists of two parts: strong and weak. As the weak part is unique to our company, we only provide information on its use.

5.1.1 The main electrical components are shown in the following table:

No.

Part Number

name

Quantity

Note

1

LW5-16/2

Universal switch

1

 

2

OB-D03NK

Limit switch

2

 

3

LAY3-11/2

Buttons

4 (one of the knobs)

 

4

LAY3-11/1

Emergency stop

4

 

5

0910

AC contactor

1

 

6

3VE

Low-voltage circuit breaker

1

 

7

JDM11-220V

counter

1

 

8

Delta 14 points

PC

1

 

9

NDI-25/40

LED

4

 

10

G18-3C5NA

Photoelectric switch

1

Correct

6 Lifting and Installation

6.1 Lifting

6.1.1 The machine tool shall not be impacted during hoisting and shall not be dumped. Pay attention to waterproofing. After unpacking, use the lifting tool to transport the machine to the installation position.

6.1.2 The machine tool covers an area of 1100mm × 3700mm. There should be proper operation and maintenance space around the installation.

If you are interested in our punch tool, please contact us freely as following:

Shenzhen P-luck Machinery Technology Co,.ltd

No10-1, tongfuyu yongshengtai industrial park, Longtian Village, Kengzi town, Pingshan District, Shenzhen city

post code: 518112

contact person: lily shen

Mobile:86-15112696960

email:machine@yixianggroup.com.cn

   yefeng022@126.com

wechat:15112696960

whatsapp:15112696960

skype:lilyshen50

 


Products List